lokid options

Usage: ./lokid [options|settings] [daemon_command…]

Options:
–help Produce help message
–version Output version information
–os-version OS for which this executable was
compiled
–config-file arg (=/home/mine/.loki/loki.conf, /home/mine/.loki/testnet/loki.conf if ‘testnet’, /home/mine/.loki/stagenet/loki.conf if ‘stagenet’)
Specify configuration file
–detach Run as daemon
–pidfile arg File path to write the daemon’s PID to
(optional, requires –detach)
–non-interactive Run non-interactive

Settings:
–log-file arg (=/home/mine/.loki/loki.log, /home/mine/.loki/testnet/loki.log if ‘testnet’, /home/mine/.loki/stagenet/loki.log if ‘stagenet’)
Specify log file
–log-level arg
–max-log-file-size arg (=104850000) Specify maximum log file size [B]
–max-log-files arg (=50) Specify maximum number of rotated log
files to be saved (no limit by setting
to 0)
–max-concurrency arg (=0) Max number of threads to use for a
parallel job
–zmq-rpc-bind-ip arg (=127.0.0.1) IP for ZMQ RPC server to listen on
–zmq-rpc-bind-port arg (=22024, 38158 if ‘testnet’, 38155 if ‘stagenet’)
Port for ZMQ RPC server to listen on
–data-dir arg (=/home/mine/.loki, /home/mine/.loki/testnet if ‘testnet’, /home/mine/.loki/stagenet if ‘stagenet’)
Specify data directory
–test-drop-download For net tests: in download, discard ALL
blocks instead checking/saving them
(very fast)
–test-drop-download-height arg (=0) Like test-drop-download but discards
only after around certain height
–testnet Run on testnet. The wallet must be
launched with –testnet flag.
–stagenet Run on stagenet. The wallet must be
launched with –stagenet flag.
–regtest Run in a regression testing mode.
–fixed-difficulty arg (=0) Fixed difficulty used for testing.
–enforce-dns-checkpointing checkpoints from DNS server will be
enforced
–prep-blocks-threads arg (=4) Max number of threads to use when
preparing block hashes in groups.
–fast-block-sync arg (=1) Sync up most of the way by using
embedded, known block hashes.
–show-time-stats arg (=0) Show time-stats when processing
blocks/txs and disk synchronization.
–block-sync-size arg (=0) How many blocks to sync at once during
chain synchronization (0 = adaptive).
–check-updates arg (=notify) Check for new versions of loki:
[disabled|notify|download|update]
–fluffy-blocks Relay blocks as fluffy blocks
(obsolete, now default)
–no-fluffy-blocks Relay blocks as normal blocks
–test-dbg-lock-sleep arg (=0) Sleep time in ms, defaults to 0 (off),
used to debug before/after locking
mutex. Values 100 to 1000 are good for
tests.
–offline Do not listen for peers, nor connect to
any
–disable-dns-checkpoints Do not retrieve checkpoints from DNS
–max-txpool-weight arg (=648000000) Set maximum txpool weight in bytes.
–service-node Run as a service node
–block-notify arg Run a program for each new block, ‘%s’
will be replaced by the block hash
–extra-messages-file arg Specify file for extra messages to
include into coinbase transactions
–start-mining arg Specify wallet address to mining for
–mining-threads arg Specify mining threads count
–bg-mining-enable enable/disable background mining
–bg-mining-ignore-battery if true, assumes plugged in when unable
to query system power status
–bg-mining-min-idle-interval arg Specify min lookback interval in
seconds for determining idle state
–bg-mining-idle-threshold arg Specify minimum avg idle percentage
over lookback interval
–bg-mining-miner-target arg Specify maximum percentage cpu use by
miner(s)
–db-type arg (=lmdb) Specify database type, available: lmdb
–db-sync-mode arg (=fast:async:250000000bytes)
Specify sync option, using format
[safe|fast|fastest]:[sync|async]:[[blocks]|
[bytes]].
–db-salvage Try to salvage a blockchain database if
it seems corrupted
–p2p-bind-ip arg (=0.0.0.0) Interface for p2p network protocol
(IPv4)
–p2p-bind-ipv6-address arg (=::) Interface for p2p network protocol
(IPv6)
–p2p-bind-port arg (=22022, 38156 if ‘testnet’, 38153 if ‘stagenet’)
Port for p2p network protocol (IPv4)
–p2p-bind-port-ipv6 arg (=22022, 38156 if ‘testnet’, 38153 if ‘stagenet’)
Port for p2p network protocol (IPv6)
–p2p-use-ipv6 Enable IPv6 for p2p
–p2p-external-port arg (=0) External port for p2p network protocol
(if port forwarding used with NAT)
–allow-local-ip Allow local ip add to peer list, mostly
in debug purposes
–add-peer arg Manually add peer to local peerlist
–add-priority-node arg Specify list of peers to connect to and
attempt to keep the connection open
–add-exclusive-node arg Specify list of peers to connect to
only. If this option is given the
options add-priority-node and seed-node
are ignored
–seed-node arg Connect to a node to retrieve peer
addresses, and disconnect
–hide-my-port Do not announce yourself as peerlist
candidate
–no-igd Disable UPnP port mapping
–out-peers arg (=-1) set max number of out peers
–in-peers arg (=-1) set max number of in peers
–tos-flag arg (=-1) set TOS flag
–limit-rate-up arg (=-1) set limit-rate-up [kB/s]
–limit-rate-down arg (=-1) set limit-rate-down [kB/s]
–limit-rate arg (=-1) set limit-rate [kB/s]
–save-graph Save data for dr monero
–rpc-bind-port arg (=22023, 38157 if ‘testnet’, 38154 if ‘stagenet’)
Port for RPC server
–rpc-restricted-bind-port arg Port for restricted RPC server
–restricted-rpc Restrict RPC to view only commands and
do not return privacy sensitive data in
RPC calls
–bootstrap-daemon-address arg URL of a ‘bootstrap’ remote daemon that
the connected wallets can use while
this daemon is still not fully synced
–bootstrap-daemon-login arg Specify username:password for the
bootstrap daemon login
–rpc-bind-ip arg (=127.0.0.1) Specify IPv4 address to bind RPC server
–rpc-bind-ipv6-address arg (=::1) Specify IPv6 address to bind RPC server
–rpc-use-ipv6 Allow IPv6 for RPC
–rpc-login arg Specify username[:password] required
for RPC server
–confirm-external-bind Confirm rpc-bind-ip value is NOT a
loopback (local) IP
–rpc-access-control-origins arg Specify a comma separated list of
origins to allow cross origin resource
sharing

Bookmark the permalink.

Comments are closed.